MVP Discs
Discpedia documents 32 MVP molds — 8 distance drivers, 9 fairway drivers, 7 midranges and 8 putt & approach discs. Speeds run from 1 to 14.5. The plastics that come up most across these entries are Neutron, Proton and Plasma. Also known as MVP Disc Sports.
Official site: MVP Disc Sports
On this page
Distance Drivers (8)
| Disc | Speed | Glide | Turn | Fade | Stability |
|---|---|---|---|---|---|
| Teleport | 14.5 | 5 | -1.5 | 2.5 | Stable |
| Catalyst | 13 | 5.5 | -2 | 2 | Understable |
| Octane | 13 | 5 | -1 | 2 | Stable |
| Photon | 11 | 5 | -1 | 2.5 | Stable |
| Wave | 11 | 5 | -2 | 2 | Stable-Understable |
| Trail | 10 | 5 | -1 | 1 | Understable |
| Impulse | 9 | 5 | -3 | 1 | Understable |
| Motion | 9 | 3.5 | 0 | 4 | Overstable |
Fairway Drivers (9)
| Disc | Speed | Glide | Turn | Fade | Stability |
|---|---|---|---|---|---|
| Inertia | 9 | 5 | -2 | 2 | Understable |
| Tesla | 9 | 5 | -1 | 2 | Stable to Overstable |
| Amp | 8 | 5 | -1.5 | 1 | Understable |
| Volt | 8 | 5 | -0.5 | 2 | Stable |
| Resistor | 6.5 | 4 | 0 | 3.5 | Overstable |
| Switch | 6.5 | 5 | -1.5 | 1 | Understable |
| Relay | 6 | 5 | -2 | 1 | Understable |
| Servo | 6 | 5 | -1 | 2 | Stable |
| Signal | 6 | 5 | -3 | 1 | Understable |
Midranges (7)
| Disc | Speed | Glide | Turn | Fade | Stability |
|---|---|---|---|---|---|
| Axis | 5 | 5 | -1 | 1 | Stable |
| Deflector | 5 | 3.5 | 0 | 4 | Very Overstable |
| Matrix | 5 | 4 | -1 | 2 | Slightly Overstable |
| Reactor | 5 | 5 | -0.5 | 1.5 | Stable |
| Uplink | 5 | 5 | -3 | 0.5 | Understable |
| Vector | 5 | 4 | 0 | 2 | Slightly Overstable |
| Tangent | 4 | 4 | -0.5 | 0.5 | Stable |
Putt & Approach (8)
| Disc | Speed | Glide | Turn | Fade | Stability |
|---|---|---|---|---|---|
| Entropy | 4 | 3 | 0 | 3 | Overstable |
| Atom | 3 | 3 | 0 | 0 | Straight |
| Anode | 2.5 | 3 | 0 | 0.5 | Stable |
| Ion | 2.5 | 3 | 0 | 1.5 | Stable |
| Spin | 2.5 | 4 | -2 | 0 | Understable |
| Nomad | 2 | 4 | 0 | 1 | Stable |
| Watt | 2 | 5 | -0.5 | 0.5 | Stable |
| Glitch | 1 | 7 | 0 | 0 | Stable |
Compare across brands. Use the
side-by-side comparison tool to put any two
molds against each other, or the
replacement finder to find
the closest match to a MVP mold in another brand’s lineup.